Charlene
Well-Known Member
he taught me well, that he did! the ramp at the shed where the riding mower is kept had seen its better days, it was probably 7 or 8 years old. gary used some old boards he found laying around, none treated, so they were all rotten.
here's what i started with...2 x 8 treated boards for support...
i used a piece of 3/4" treated plywood...
TA DAAA!!!
and now, for the coup de gras...while digging for the center support board, in a place that has not been dug in before, all the while wondering if i was doing a job that would be suitable to gary, i found THIS about 8" down in the ground...
A PENNY FROM HEAVEN!!!!!
here's what i started with...2 x 8 treated boards for support...
i used a piece of 3/4" treated plywood...
TA DAAA!!!
and now, for the coup de gras...while digging for the center support board, in a place that has not been dug in before, all the while wondering if i was doing a job that would be suitable to gary, i found THIS about 8" down in the ground...
A PENNY FROM HEAVEN!!!!!