Jump to content

Archived

This topic is now archived and is closed to further replies.

GlacierRidge

Temporary foaling stalls?

Recommended Posts

I only have one foal coming this summer, and I would like to put up a temporary foaling stall as that time gets closer, with plenty of time for her to get comfortable in it. I have wire panels but I don't want to use them....I want something safer. Has anyone made a temporary foaling stall, and how do you like it? I was considering buying some of the Priefert miniature horse panels, but they certainly aren't cheap! Would be quick and easy though, and I'm not ruling it out! Something that I could use in different situations!

 

Thanks!

 

Share this post


Link to post
Share on other sites

I just use a regular stall in the barn, nothing different really except it is the one with the foal cam up and working. It does have a removable wall so I can make it double size, but so far, I haven't really had to do that. It is the one on the very end next to the tack room so I can get my supplies easily. Best wishes for a nice healthy baby.

Share this post


Link to post
Share on other sites

I have seen people take wire panels and zip-tie 4 x 8 peg boards (the kind you would use in a shop to hang tools on) to them so that they are for all intents & purposes "solid" walls - pretty inexpensive and seem to be quite safe, altho you will need a lot of zip-ties!

 

Stacy

Share this post


Link to post
Share on other sites

I set up my foaling stalls in the garage. I use the miniature panels set up on the rubber pads you can get at Sam's Club or Costco. These were 8'x8' and so far all the mares have had plenty of room. This past year I switched to 10' stalls. I've got 2 cameras, one on each side.

 

IPB Image

 

 

Share this post


Link to post
Share on other sites

Thanks for the advice! Minimule, that's a GREAT picture! I may look into mini panels... I have a couple of stalls in the barn. But there are reasons I won't be using them. I want the stall set up in a certain spot...just want it temporary...

 

I may look into those mini panels! However, will share what I have now.

 

Billy Goat Gruff panels

 

The squares are 5" I think.... and just wasn't sure if the squares are too big? This is my first mini foal (well, it's a donkey, so my first donkey foal too!)... we have bred several full sized horses.... but the gate and panels I have (linked above) are used to fence off a run in area for them inside the barn......and if I used them, would just be buying a couple more. I have now 2 10' panels and a 5' gate panel. But I would need those to stay where they are....would just buy another gate panel and another fence panel (as it would be set up in a corner.)

 

What do you think of those?

Thanks!

 

Share this post


Link to post
Share on other sites

Thanks for the advice! Minimule, that's a GREAT picture! I may look into mini panels... I have a couple of stalls in the barn. But there are reasons I won't be using them. I want the stall set up in a certain spot...just want it temporary...

 

I may look into those mini panels! However, will share what I have now.

 

Billy Goat Gruff panels

 

The squares are 5" I think.... and just wasn't sure if the squares are too big? This is my first mini foal (well, it's a donkey, so my first donkey foal too!)... we have bred several full sized horses.... but the gate and panels I have (linked above) are used to fence off a run in area for them inside the barn......and if I used them, would just be buying a couple more. I have now 2 10' panels and a 5' gate panel. But I would need those to stay where they are....would just buy another gate panel and another fence panel (as it would be set up in a corner.)

 

What do you think of those?

Thanks!

 

I really like the billy goat gruff panels you showed. Where did you get them and what was apporximate cost?

 

 

Share this post


Link to post
Share on other sites

I set up my foaling stalls in the garage. I use the miniature panels set up on the rubber pads you can get at Sam's Club or Costco. These were 8'x8' and so far all the mares have had plenty of room. This past year I switched to 10' stalls. I've got 2 cameras, one on each side.

 

IPB Image

Shawna --

 

After seeing your pictures, my husband's probably not going to be nearly as impressed as I am with my "day dream" for the carport that's just off my laundry room (currently houses my bumper pull trailer). Just thinking how I could step out my laundry room and be in my "foaling stalls". I'll be pitching this little notion this evening :BigGrin Already got the dividers in the storage building, too, so........

 

Jill

Share this post


Link to post
Share on other sites

I like those gates - I'd like to find out where you got them and approx cost also.

 

Thanks

Share this post


Link to post
Share on other sites

:BigGrin My hubby has been good. For the past 3 years he has let me "take over" the whole garage for the mares. Last year we only had 2 foals so I only took up 1 half. I'm hoping this year I can have a foaling barn set up instead.

 

I like those Billy goat panels too. My newest panels I found are 4' tall with 9 rails. They come in 10' and 6' lengths with a 4' or 6' gate panel.

 

IPB Image

 

 

Share this post


Link to post
Share on other sites

So you all think those Billy Goat Gruff panels would be safe? I guess it makes sense.....they're meant for kidding pens for goats! I bought them at Tractor Supply. And still have the "research" sheet with prices when I was looking.... they come in 10', 5' and a 5' walk thru panel.

 

10'-$88 (52" high, 50 lbs)

5'- $58 (52" high, 27 lbs)

5' gate panel- $100 (100 lbs)

 

I was SO HAPPY with these. I had chainlink panels in there, but my goats rubbed on them so bad in the spring when they were shedding that they stretched it all out something nasty. If my mini had an itch, he used them too. So I bought these, and they are SO heavy duty, there is NO stretching them! They're like cattle panels in frames! The only thing I do not like is the gate latch (I wish I could operate it with one hand, when I'm going out to feed), but if I could change that down the road if I need to. I also primed and painted mine, hoping to protect them even more, since they were an expensive investment (for us!) But they're great, the holes are big enough that my barn cat can walk thru to go outside, and also too big for feet to get caught up, but not big enough for anyone to get a head in. I just wasn't sure about a mini foal....

 

The website is www.tartergate.com

 

 

 

 

Share this post


Link to post
Share on other sites

×